1. Clock made of an old cassette
· an old and worn cassette
· a clockwork
· a spoke
· pliers
· hot glue
Clean the cassette first and take it apart as you will only need its upper section. Place the clockwork to the centre of the cassette and fix it to its place with the hot glue. Bend the spoke to shape with the pliers to form a stand that will help keeping your new clock in a steady position.
2. Belt made of bicycle tyre
· a worn bike tyre (with kevlar bead)
· a belt buckle
· a punch
· scissors
· a needle and some string
Cut the old tyre half and cut the kevlar bead off the edges with a pair of scissors. Then cut it to the requested length. Cut one end to shape nicely and fasten the belt buckle to the other end. With the help of the punch, pierce a few holes on the surface. Grab the spare piece of rubber and cut out a small piece that will be our loop on the belt. Once this is done your new belt is ready.
3.Coaster made of chainrings
· old and worn chainrings (pieces from an old cassette)
· cork sheet
· scissors
· pen or pencil
· hot glue / super glue
· varnish (or paint if requested)
Place the previously cleaned and degreased chainrings on the top of the cork sheet. (This can be painted as well if necessary.) Draw light outlines around the chainring. Cut the circles out with the pair of scissors. (Tip: we advise to cut a slightly smaller size than the one you marked before). Now glue the chainrings on the circle shaped cork sheets with hot glue / super glue. The last step is to apply a thin layer of varnish and you are finished.
